Products

Switch products for sale online in Zambia

A device for making and breaking the connection in an electric circuit.
1-11 of 11 results
30
1
4
Sunray Power Company
Sunray Power Company
Power generation
Sup2 500v 20ka-40ka 2pole image
K755
This switch the Sup2 500V 20KA-40kA 2Pole, is a type of electrical switch that is designed to control the flow of electrical current in a circuit.
Sunray Power Company
Sunray Power Company
Power generation
Sup2 1000v 20ka-40ka 3pole image
K1,135
Sup2 1000V 20kA-40kA 3Pole is a specification for a type of electrical circuit breaker that is designed to protect against overloading or short-circuiting in three-phase electrical systems.
Sunray Power Company
Sunray Power Company
Power generation
Np 250v 12a 1pole, 250v image
K260
Np 250v 12a 1pole, 250v
Switch
Zambezi Steel
NP 250V 12A 1Pole, 250V is a circuit breaker with a voltage rating of 250 volts, an amperage rating of 12 amps, and a single pole design, typically used to protect a single circuit from overloading or short-circuiting.
Sunray Power Company
Sunray Power Company
Power generation
Np 250v 10a 1pole, 250v image
K260
A NP 250V 10A 1Pole, 250V switch is an electrical component that is designed to control the flow of electricity in a circuit.
Sunray Power Company
Sunray Power Company
Power generation
Dc 1000v 16a 4 Pole image
K910
DC 1000V 16A 4 Pole refers to an electrical switch or circuit breaker that is designed for use in direct current (DC) electrical systems.
Sunray Power Company
Sunray Power Company
Power generation
2 Pole 40a Change over Switch, Din, 2m image
K312
A 2 Pole 40A Changeover Switch is an electrical switch used to transfer power between two separate circuits. It is typically used in situations where there is a need to switch between two power sources or to switch a load between two different electrical systems.
Sunray Power Company
Sunray Power Company
Power generation
Earth Leakage, 63a image
K845
Earth leakage refers to the flow of electrical current from a circuit to the earth or ground due to a fault or insulation breakdown in the system. This can be a serious safety hazard as it can result in electric shock or fire.
Sunray Power Company
Sunray Power Company
Power generation
Automatic Transfer Switch 63a 2pole image
K1,870
An Automatic Transfer Switch (ATS) 63A 2Pole is a device used to switch power between two sources of electrical power in the event of a power outage or other failure.
Sunray Power Company
Sunray Power Company
Power generation
Automatic Voltage Switch, 30a image
K3,000
An Automatic Voltage Switch (AVS) is an electrical device that automatically switches the power supply to a connected device or appliance based on the input voltage level.
Sunray Power Company
Sunray Power Company
Power generation
Class 1&2 Lightning Protection, 275vac image
K3,280
Class 1&2 Lightning Protection, 275VAC refers to a type of protection system that is designed to protect electrical equipment from lightning strikes.
Sunray Power Company
Sunray Power Company
Power generation
Avs30 30a 230v (Automatic Volatge Switch) surge Type 3 image
K1,787.88
AVS30 30A 230V (Automatic Voltage Switch) Surge Type 3 is a type of surge protector that is designed to protect electrical equipment from power surges and voltage fluctuations.

Switches

A device for making and breaking the connection in an electric circuit.

A network switch is networking hardware that connects devices on a computer network by using packet switching to receive and forward data to the destination Switches are key building blocks for any network. They connect multiple devices, such as computers, wireless access points, printers, and servers; on the same network within a building or campus. A switch enables connected devices to share information and talk to each other. An electrical switch serves the purpose of controlling the flow of electrical current within a circuit. It can be used to both inhibit the flow of the current or to initiate it. An electrical switch serves the purpose of controlling the flow of electrical current within a circuit. It can be used to both inhibit the flow of the current or to initiate it.

A 3-way switch is one that allows you to control a ceiling light (or other electrical fixture) from two separate locations. Common scenarios would be 3-way switches located at both the top and bottom of a stairway, or having 3-way switches next to doors in a room with two entry points.

One of two electrical switches (as at the top and bottom of a stair) controlling a single outlet.

A switch in an electronic device is used to interrupt the flow of electricity or electric current. Electrical switches are binary devices, they can be either completely off or completely on. In simple English, a switch is an electronic device which is used to break or make the electronic circuit.

Main switches are elementary switching and protective devices for safe machine control. They can be used, for example, as repair switches to quickly switch off large machines and systems so that maintenance work can be carried out safely.

A switch is an assistive technology device that replaces the need to use a computer keyboard or a mouse. It may allow users to control a computer, power wheelchair, video game console, tablet, smartphone, toy, and a variety of other electronic devices.

Types of Switches. There are three types of mechanical switches: linear, tactile, and clicky.

A current switch is used to monitor this current level. A set of contacts will change state from either a closed condition to an open condition or vice versa. This change in contact state will either remove or apply a signal to the system controller signaling the abnormal operation of the monitored motor.

The definition of a switch is a device used to make or break a connection in a circuit so you an turn power on and off to something, or a change in attitude or policy. An example of a switch is the switch on the wall you use to turn your light on and off.

Four-way switches are used to control lighting from three or more locations. Four-way switches are used in combination with 3-way switches. There are four terminals that provide two sets of toggle positions on a 4-way switch. Each set of terminals is one of the toggle positions

A two-way switch turns lights on or off from one location only. Light can be turned on or off from 2 locations with a three-way switch.

Circuits controlled by two (single pole, double throw) switches are called three-way by convention to distinguish them from circuits controlled by one (single pole, single throw) switch, which may be considered two-way (on, off).

1 Way Switches: If a light switch is '1 way' this means it is just an on/off switch. This is the simplest type of switch that you can get. The single switch controls a single light (or lighting circuit). 2 Way Switches: A '2 way' switch means there is another switch controlling the same light