The MultiPlus-II will prevent the overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery.
The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS (Energy Storage System) manual.
In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto-starting a backup generator and more…"
Weight | 29kg |
---|---|
Dimensions | 56.5cm · 32.3cm · 14.8cm |
Product Title | Victron Energy MultiPlus-II 48/5000/70-50 230V Inverter Charger |
Stock Code | VPMP482505010 |
Product Code | PMP482505010 |
PowerControl | Yes |
PowerAssist | Yes |
Transfer switch | 50A |
Inverter DC Input voltage range | 38 – 66 V |
Inverter Output voltage | 230 VAC ± 2% |
Inverter Frequency | 50 Hz ± 0,1% |
Inverter Peak Power | 9000W |
Inverter Maximum efficiency | 96% |
Inverter Zero load power | 18 Watts |
Inverter Zero load power in AES mode | 12 Watts |
Inverter Zero load power in AES mode | 2 Watts |
Charger Input voltage range | 187-265 VAC |
Charger | 10.1” touchscreen |
Charger Input frequency | 45 – 65 Hz |
Charge voltage 'absorption' | 57.6 V |
Charge voltage 'float | 55.2 V |
Charger Storage mode | 52.8 V |
Charger Maximum battery charge current | 70A |
Charge current starter battery | N.A |
Battery temperature and voltage sensor | Yes |
Auxiliary output | Yes (32 A) Relay with 2 minutes turn on delay |
External current sensor (optional) | 100A |
Programmable relay | Yes |
Protection | a-g |
VE.Bus communication port | For parallel and three phase operation, remote monitoring and system integration |
General purpose com. ports | Yes, 2x |
Remote on-off | Yes, 2 pole |
Operating temperature range | -40 to +65°C (fan assisted cooling) |
Humidity (non-condensing) | max 95% |
Material | Steel |
Material | Blue RAL 5012 |
Battery-connection | M8 Bolts |
230 V AC-connection | Screw terminals 13 mm² (6 AWG) |