Quattro 48/10000/140-100/100 230v Ve.Bus Inverter Charger
Buy online
Further information
Features & Benefits
Two AC Inputs & two AC Outputs
The Quattro can be connected to two independent AC sources, for example, shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is life only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.
Unique PowerAssist feature
The Quattro will prevent the overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery.
Virtually unlimited power thanks to parallel operation
Up to 6 Quattros can operate in parallel to achieve higher power output. Three-phase or split-phase operation is also possible. Please check our datasheets to see which models have paralleling, three-phase and split-phase capabilities.
Remote Monitoring and Control
When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Quattro and system or systems locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Quattro to auto-starting a backup generator and more…
| Weight | 51kg |
|---|---|
| Dimensions | 47cm · 35cm · 28cm |
| Product Title | Victron Energy Quattro 48/10000/140-100/100 230V VE.Bus Inverter Charger |
| Stock Code | VQUA481030010 |
| Product Code | QUA481030010 |
| PowerControl & PowerAssist | Yes |
| Integrated Transfer switch | Yes |
| Input voltage range | 187-265 VAC |
| Input frequency | 45 – 65 Hz |
| Power factor | 1 |
| Maximum feed through current | 2 x 100A |
| Inverter Input voltage range | 9.5 – 17V, 19 – 33V, 38 – 66V |
| Inverter Output voltage | 230 VAC ± 2% |
| Inverter Frequency | 50 Hz ± 0.1% |
| Inverter Peak Power | 20,000 Watts |
| Inverter Maximum efficiency | 96% |
| Inverter Zero load power | 57.6 VDC |
| Inverter Zero load power in AES mode | 55.2 VDC |
| Inverter Zero load power in Search modes | 52.8 VDC |
| Charge current house battery | 140A |
| Charge current starter battery | 4 (12V and 24V models only) |
| Battery temperature sensor | Yes |
| Auxiliary output | 50A |
| Programmable relay | 3x |
| Protection | a-g |
| VE.Bus communication port | For parallel and three phase operation, remote monitoring and system integration |
| General purpose com. port | 2x |
| Remote on-off | Yes |
| Operating temp. | -40 to +65˚C |
| Humidity (non-condensing) | max. 95% |
| Maximum altitude | 3500 metres |
| Material | Aluminium |
| Colour | Blue (5012) |
| Protection category | IP 21 |
| Battery-connection | Four M8 bolts (2 plus and 2 minus connections) |
| 230 V AC-connection | Bolts M6 |
Enquire about this item
Contact supplier
