Easysolar-Ii 48/3000/35-32 Mppt 250/70 Gx Inverter Charger
Buy online
Further information
The all-in-one solar power solution
The Victron EasySolar-II GX integrates the following elements:
- A MultiPlus-II inverter/charger
- A SmartSolar MPPT -Tr solar charge controller
- A GX device with a 2 x 16-character display.
These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.
Display and Wi-Fi
The display reads battery, inverter and solar charge controller parameters.
The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings.
Solar charge controller
The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT.
GX device
The integrated GX device includes:
A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port.
- A USB port
- An Ethernet port
- A VE.Direct port
The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively VE.Bus and a VE.Direct connection
| Weight | 26kg |
|---|---|
| Dimensions | 49.9cm · 26.8cm · 23.7cm |
| Product Title | Victron Energy EasySolar-II 48/3000/35-32 MPPT 250/70 GX Inverter Charger |
| Stock Code | VPMP482307010 |
| Product Code | PMP482307010 |
| PowerControl & PowerAssist | Yes |
| Integrated Transfer switch | Yes |
| Input voltage range | 38 – 66 V |
| Input frequency | 187-265 VAC |
| Maximum feed through current | 2470W / 3000 VA |
| Inverter Output voltage | 230 VAC ± 2% |
| Inverter Frequency | 50 Hz ± 0.1% |
| Inverter Peak Power | 5,500 Watss |
| Inverter Maximum efficiency | 95% |
| Inverter Zero load power | 11 Watts |
| Inverter Zero load power in AES mode | 7 Watts |
| Inverter Zero load power in Search modes | 2 Watts |
| Charge current house battery | 35A |
| Battery temperature sensor | Yes |
| Auxiliary output | 32A |
| Programmable relay | Yes |
| Protection | a-g |
| VE.Bus communication port | For parallel and three phase operation, remote monitoring and system integration |
| General purpose com. port | 2.1 stereo system |
| Remote on-off | 10.1” touchscreen |
| Operating temp. | -40 to +65˚C |
| Humidity (non-condensing) | max. 95% |
| Maximum altitude | 2,000 metres |
| Material | Aluminium |
| Colour | Blue (5012) |
| Protection category | IP21 |
| Battery-connection | M8 bolts |
| PV connection | M6 bolts |
| 230 V AC-connection | Screw terminals 16 mm2 (6 AWG) |
Enquire about this item
Contact supplier
